Massassi Forums Logo

This is the static archive of the Massassi Forums. The forums are closed indefinitely. Thanks for all the memories!

You can also download Super Old Archived Message Boards from when Massassi first started.

"View" counts are as of the day the forums were archived, and will no longer increase.

☖ Forums → Jedi Knight and Mysteries of the Sith Editing Forum → Adding new templates
Adding new templates
2001-05-19, 6:05 PM #1
I've added several new templates to my .jkl file and now the rest of the templates don't work. The new ones work fine, but no other templates in the .jkl will work. If I mark out a few of the new templates, then all of them will work ok.

Could you give me several things I need to check, or should I post the templates?

------------------
The enemy is in front of us, behind us, to the left, and to the right. This time they won't get away.
Author of the JK DataMaster, Parsec, Scribe, and the EditPlus Cog Files.
2001-05-20, 12:48 PM #2
Anybody?

------------------
The enemy is in front of us, behind us, to the left, and to the right. This time they won't get away.
Author of the JK DataMaster, Parsec, Scribe, and the EditPlus Cog Files.
2001-05-21, 9:26 AM #3
Here's the templates:

Code: 
+missile	+railbase1	thingflags=0x20000400 timer=1000 model3d=missile.3do size=0.003000 movesize=0.003000 puppet=ra.pup soundclass=missile.snd creatething=+lgflash airdrag=0 height=0.003 physflags=0x200 vel=(0/2.5/0) angvel=(0/0/0) explode=+missile_exp2 fleshhit=+missile_exp2 damage=5.000000 typeflags=0x24020d
+m1		+missile		cog=m1.cog
+m2		+missile		cog=m2.cog vel=(0/0/0)
+m3		+missile		cog=m3.cog vel=(0/0/0)
+m4		+missile		cog=m4.cog vel=(0/0/0)


These templates work fine, but for some reason the rest of my templates in the static.jkl don't work. When I put a # before some(but not necessarily all) of these new templates, everything works.

What's wrong? [http://forums.massassi.net/html/confused.gif]

------------------
The enemy is in front of us, behind us, to the left, and to the right. This time they won't get away.
Author of the JK DataMaster, Parsec, Scribe, and the EditPlus Cog Files.
2001-05-22, 10:56 AM #4
http://www.massassi.net/tutorials/weapon_template/
Brian is not a god...or a punk.
2001-05-22, 6:31 PM #5
I've read that tutorial already, and I don't see anything in my template that could cause the rest of the templates in the static.jkl not to work.

That tutorial didn't say anything about declaring your cogs, 3dos, etc in the sections above the templates in the .jkl. That is probably where my problem lies.

Thanks anyway, Docter. [http://forums.massassi.net/html/wink.gif]

Now could someone give me something else to try?

------------------
The enemy is in front of us, behind us, to the left, and to the right. This time they won't get away.
Author of the JK DataMaster, Parsec, Scribe, and the EditPlus Cog Files.
2001-05-23, 6:17 AM #6
hmm, are the templates above the rest of them, or below? I don't know if that matters, but you might try moving them around...

[oh yeah, and what about +railbase1? Is that defined above the new ones?]

[This message has been edited by Sarn_Cadrill (edited May 23, 2001).]
If you choose not to decide, you still have made a choice.

Lassev: I guess there was something captivating in savagery, because I liked it.
2001-05-23, 7:34 AM #7
Okay, I have it fixed. My templates wouldn't work because I didn't have my cogs defined correctly. I had them listed in the cogscripts section instead of the cogs section.

And Sarn, when I added about 15 templates into the static.jkl some of the last ones I added didn't work. I fixed it somehow by moving them around, but I think if I had defined everything correctly and had all of the "based on" templates above it, it would have worked fine.

Thanks to everyone who replied [http://forums.massassi.net/html/wink.gif]

------------------
The enemy is in front of us, behind us, to the left, and to the right. This time they won't get away.
Author of the JK DataMaster, Parsec, Scribe, and the EditPlus Cog Files.

↑ Up to the top!